Car lift TC 2C 3000

Car lift TC  2C 3000  is the economical way of lifting vehicles between the floors. It is designed for installation in a concrete shaft. Maximum safe load up to 4000 kg, speed 0.13 m/s. After the lift's elevation, the shaft has to be secure. If the shaft is secured with tightly closed walls, appropriate ventilation has to be considered. The lift's entrances has to be secured with suitable doors. The lift is in accordance with the EC machinery directive.

Legend: 1) Useful lift size width CW and deep CD. 2) Photo curtain on the entrances 3) Sidewalls 4) Reinforce concrete wall for the guide rails 5) Guide rails 6) Power cabinet 7) Pit or ramp.

Model Max safe load Width size CW Deep size CD Travel Stops Add to cart
Car lift TC 2C 3000
${ errors['85058_85059'] }
${ errors['85058_85060'] }
${ errors['85058_85061'] }
${ errors['85058_85062'] }
${ errors['85058_85063'] }
${ errors['85058_85064'] }
${ errors['85058_85065'] }
${ errors['85058_85066'] }
${ errors['85058_85067'] }
${ errors['85058_85068'] }


Models D1 and D2 (Door 1 side hinged or Door 2 side hinges) are industrial lift doors made via a new technology without welding. The locks and the hinges are outside the door for a 180-degree opening. The door complies with ЕN81-20 and EN 81-50. The door lock has a CE mark for safety regarding Lifts Directive 2014/33/EU or 2006/42/EC. The model D1H (Door 1 side hinged Half) is suitable for the installation on the last floor. The door model DFF (Door Fire Fight) is fireproof with protection class EI 60 or EI 120, according to EN 1634-1, EN 1363-1, and EN13501-2.

Door model Door opening clear width DO Door opening clear heigh DH Material/finish Quantity Add to cart
D1 one side hinged
${ errors['85101_85102'] }
${ errors['85101_85103'] }
${ errors['85101_85104'] }
${ errors['85101_85105'] }
D2 double hinge door
${ errors['85116_85117'] }
${ errors['85116_85118'] }
${ errors['85116_85119'] }
${ errors['85116_85120'] }
D1H half door
${ errors['85106_85107'] }
${ errors['85106_85108'] }
${ errors['85106_85109'] }
One Door
${ errors['85106_85110'] }
DFF Fireproof
${ errors['85111_85112'] }
${ errors['85111_85113'] }
Standard RAL system
${ errors['85111_85114'] }
${ errors['85111_85115'] }

The door model FR (Fast Rolling) is a fast industrial rolling door with 2 lines of transparent labels for observations. It complies with 2006/42/EC. The door model 6C is a central opening sliding door in compliance with ЕN81-20 and EN 81-50. The model 4C FF is a fireproof, automatic sliding door in compliance with EN81-58, class E120, EW60, IE30 and IE120. 

Door model Door opening clear width DO Door opening clear heigh DH Material/finish Quantity Add to cart
Fast Rolling Door FR
${ errors['85130_85131'] }
${ errors['85130_85132'] }
${ errors['85130_85133'] }
${ errors['85130_85134'] }
Sliding door 6C
${ errors['85135_85136'] }
${ errors['85135_85137'] }
${ errors['85135_85138'] }
${ errors['85135_85139'] }
Fireproof Door 4C FF
${ errors['85140_85141'] }
${ errors['85140_85142'] }
${ errors['85140_85143'] }
${ errors['85140_85144'] }

The lift's cabin is a fully enclosed steel construction. It is a state-of-the-art option. Use this option so the lift becomes resistant to breaking due to incorrect operation. 

Legend: 1) Reinforced steel kick plate. 2) Photo curtain for cabin entrance protection 3) Guide rails. 4) Concrete walls for the guide rails.

Cargo cabin Clear heigh CH Material/finish A guard at the entrance Add to cart
Single entry cabin
${ errors['85083_85084'] }
${ errors['85083_85085'] }
${ errors['85083_85086'] }
Double entry cabin
${ errors['85087_85088'] }
${ errors['85087_85089'] }
${ errors['85087_85090'] }

With the ramp, the lift can be installed directly on the finished floor. It is not necessary to dig a pit below the finished floor. 

Option Add to cart

IP 53 is the standard protection class for the TC industrial lift. The lift power stations have IP 43. If you plan to install the lift outdoor or in an aggressive environment, you need better protection.

Options for IP IP class Add to cart
Better protection
${ errors['85149_85150'] }